Installing To Existing Posts

1. Place aluminium runners between the grooves of each H post. Fix into place using the screws provided.

If installing onto solid posts then surface mount the aluminium runners centrally onto each post. Fix into place using the screws provided.

Please note that you may have to cut trims and slats depending on the post thickness

2. Please refer to page 13. Once slats have been installed please refer back to this page.

3. Slide the aluminium finishing trim between the aluminium runners ensuring that the flat side faces up. Push the f inishing trim onto the top slat and fix into place using the screws provided.

4. Measure from the top of the finishing trim to the top of the aluminium runners.

5. Cut the fence post trims to size and slide between the aluminium runner.

6. Continue the same process for all fence posts.