Oak Superior Composite Decking - 3.6m

Oak Superior Composite Decking – 3.6m

For an eco-friendly alternative to timber, choose Assured Composite’s fade resistant Oak Superior Composite Decking. With a 3D embossed wood-effect or grooved channel finish, it closely resembles a traditional oak timber deck while offering all of the benefits of a wood polymer composite deck (WPC). Colour consistent which boasts sophistication and class like no other outdoor flooring, we’re proud to be eco-conscious and make our oak deck boards from 95% recycled materials.

Suitable For: residential or light commercial use
Hollow Core: cost-efficiency and durability
Capped Polymer Coating: UV resistant, stain resistant and water resistant
Reversible: 3D embossed woodgrain or grooved channel finish
Easy Installation: using our fast decking clip system
Warranty: 10 year commercial and 25 year residential

Bring your outdoor space to life by using Assured Composite’s Superior Composite Decking boards. Made from 95% recycled materials and boasting a 10 year commercial and 25 year residential warranty, Superior Composite Decking is a more cost effective and eco-friendly choice over timber. The 3D embossed dual-sided deck boards come in a range of colour options and can be used with Assured Superior and Elite Corner Trims, Fascias and Bullnose Edge Boards to add the finishing touches to your deck.

Use Assured Composite’s Decking Stainless Starter Clips to start the run of your decking boards. Decking Plastic Clips (6mm gap between deck boards) or Decking Stainless Clips (3mm gap between deck boards) can be used to install the rest of your decking providing you the same space between deck boards.

Hollow Composite Joists can be used as a perfect subframe on a solid foundation to support deck boards and provide the minimum ventilation required. For soft foundations you can use Plastic Joists and Posts that come in a range of sizes to suit any decking project.

Order your free samples now and see for yourself the quality and durability of our wood polymer composite (WPC) solid and hollow deck boards.

Our capped composite decking boards in our Superior and Elite ranges are UV resistant due to the polymer coating. There are benefits to all of our composite decking ranges so take a look at our compare ranges page to see which product suits you and your decking project.

Specifications

Decking Board Colour Options - Oak, smoke grey, stone grey
Decking Board Material - Wood Polymer Composite (WPC)
Decking Board Material Composition - 50% Recycled wood, 38% recycled plastic, 12% additives (7% recycled)
Decking Board Surface - Dual sided. 3D embossed woodgrain
Decking Board Dimensions - L3600mm x W143mm x H23mm
Decking Board Weight - 11.5kg
Decking Board Fixings - Assured Elite Stainless Starter Clips, Assured Elite Plastic Clips, Assured Elite Stainless Clips
Decking Board Warranty - 10 Year commercial and 25 year residential
Click here to see our product material specifications.

Installation

Assured Composite^®s product range is made to the highest possible standard and with the correct installation will withstand the test of time.

Please click here to see our installation and care guides for guidance on how to install and look after your composite products.

Performance

Density - 1.32g/cm3 - ASTM D792-00
Moisture Content - 0.18% - ASTM D7031-11 Section 5.15, ASTM D4442-16 Method B
Impact Resistance - >137 J - ASTM D4495-16
Shore Hardness - D/70/1 - ASTM D2240-15
Mould Proof Level - 0[1] - ASTM G 21-15
Fire Proof Level - B-s1, d0 - EN ISO 9239-1:2010, EN ISO 11925-2:2010+AC:2011
Water Absorption - 0.15% [2] - Refer to GB/T 17657- 0213 Section 4.6
Tensile Strength - 9.97 MPa - ASTM D638-14
Shear Strength - 15.2 MPa - ASTM D732-17
Bending Strength - 25.65 MPa - ASTM D7031-11 Section 5.5 & ASTM D6109-13 Method A
Linear Thermal Expansion - 51.96-6 K-1 - EN15534-1:2014
Screw Withdrawal - 3173N - ASTM D7032-17 Section 5.5 & ASTM D1761-12
Nail Withdrawal - 408N - ASTM D7032-17 Section 5.5 ASTM D1761-12
Flexural Modulus - 3833 MPa - ASTM D7031-11 Section 5.5 & ASTM D6109-13 Method A
Flexural Strength - 32.8 MPa - ASTM D7031-11 Section 5.5 & ASTM D6109-13 Method A
Formaldehyde Emission - 0.02ppm [3] - ASTM D6007-1
Click here to see our product test reports.

Delivery

We aim to dispatch all products within 1 – 3 days working days. The cut off time for processing orders is 11:00am Monday – Friday.

All deliveries will be made between the hours of 7:00am – 7:00pm Monday – Friday.

Once an order has been placed, dispatched or ready for collection you will be notified.

Collection – The customer must take into account the size of the order and use an appropriate vehicle when collecting from our warehouse. Manual loading and securing loads is the responsibility of the customer.

Palletised Deliveries/3m+ Lengths – Deliveries are kerbside only. It is the customers responsibility to provide help offloading products when being delivered. We strongly advise to wear PPE where applicable.

Accepting Delivery – The customer must be present to sign the delivery note. Any signs of damaged, missing or incorrect pieces must be stated on the delivery note or the customer must refuse delivery and contact us within 12 hours. Photographic evidence will be taken by our driver. A signed delivery note without notations represents acceptance of the complete order in perfect condition.

For deliveries internationally please get in touch with our team.

To view our full delivery charges please click here.

To view our terms and conditions for deliveries and collections please click here.

Reviews

There are no reviews yet, bet the first to leave a review on this product!

Add a review